Nvidia’s latest flagship GPU — the GeForce RTX 3090 Ti — will have a third 8-pin adapter, according to Tom’s Hardware. We’ve known for a long time that the 3090 Ti would be power-thirsty, and now it’s clear how Nvidia intends for the card to draw its power.
It’s been known for quite a while that the 3090 Ti would require a different power supply for PC upgraders. The actual power cable is a next-gen PCIe 5.0 12VHPWR connector, which is a 12+4 pin cable that can deliver up to 600 watts of power. It’s also part of the ATX 3.0 standard for new PSUs that Intel recently announced. That means any modern ATX power supply should work with the cable without the need for an adapter.
This new cable can deliver between 150W and 600W, which exceeds the power delivery of the included triple 8-pin adapter. However, not every power supply on the market is compatible with the 12VHPWR, so Nvidia has included the triple 8-pin adapter to make sure the card works on every setup.
The triple 8-pin adapter shows just how much power the RTX 3090 T is going to draw. When the original 3090 shipped, it included a 12-pin to double 8-pin adapter. Nvidia’s reasoning was very similar at the time. The RTX 3090’s 350W TDP put it well ahead of its competition — and even other Nvidia cards — when it comes to power draw. With a third 8-pin connector added for the 3090 Ti, we can expect this card to well exceed the TDP of the 3090. Our previous reporting indicates the TDP could fall anywhere between 400W and 500W.
When you look at the specs of the RTX 3090 Ti, it’s no surprise that it will require this much juice. The flagship card runs 10,572 CUDA cores (compared to 10,496 on the regular 3090) and 24GB of GDDR6X memory.
The 3000 series of RTX cards (particularly the higher-end ones) are known for being power-hungry, especially compared to prior generations. That’s something AMD’s latest series of GPU cards is apparently aiming to beat Nvidia at. We are still several months away from seeing next-generation cards, though. The RTX 3090 is much closer, with an expected launch date of March 28.
The absolutely absurd idea of putting a touchscreen display on a mouse isn't exactly new. Turtle Beach already did it with its Command Series MC7, which features a 2.25-inch control screen. But apparently, even that wasn't ridiculous enough for Arctic Fox Technologies. Its new Super Mouse looks like someone took the chunky old Atari ST mouse, slapped a touchscreen and scroll wheel on it, and called it an upgrade.
The result is a rather unusual-looking mouse that is now on Kickstarter, starting at $199. And as ridiculous as it looks, some of its features are genuinely intriguing.
Apple is less than a day away from launching its highly anticipated OLED MacBook Pro with a touch-sensitive screen. But it appears that the upgrade is going to cost a pretty penny. According to a report by Bloomberg, Apple is reportedly eyeing a starting price of $2,899 for the 14-inch MacBook Pro, while the 16-inch version could start at $3,399 in the US.
"At $2,899, the 14-inch model would mark the highest starting price for a new MacBook Pro model, surpassing the $2,799 Apple charged for a 17-inch version introduced in 2006," says the report. The report claims that Apple is targeting a minimum price hike of $400 for its upcoming redesigned 14-inch and 16-inch MacBook Pro models.
I've spent a good amount of time digging into the spec sheet of the new M6 MacBook Pro (14-inch), and for all intents and purposes, this is a classic Apple "chip and connectivity" refresh. It's not a full redesign. The chassis, Liquid Retina XDR panel, speakers, ports, and battery, all of them carry over unchanged.
However, the M6 brings more cores, stronger on-device AI, higher memory bandwidth on the larger configs, and modern wireless. Here’s the practical rundown of what actually improved, and whether those gains are worth your money.