Palworld is the first game to blow up in 2024, and though it might have been dubbed a mere “Pokémon with guns” experience, there’s no denying its popularity. However, it is very, very early access, and the experience can be a little clunky. That early stage of development also means it’s not the best-optimized game out there, leading to occasional performance hiccups on even powerful hardware.
So it’s important to know the best settings for Palworld so you can get the best performance and visuals while you tame and exploit your new pals.
Preset: If you just want to set and forget your Palworld graphics, set this to an estimated level for your graphics performance. If you have a high-end system, High will be fine. If you expect to struggle to get the game running at all, make sure it’s on Low.
Screen mode: Fullscreen. It gives you the best performance, and you won’t accidentally click out of the screen if you use multiple monitors.
Screen resolution: Set this to the native resolution of your monitor, whether that’s 1080p, 1440p, 4K, or some unique ultrawide resolution. Sitting at native gets you the best picture quality.
Max fps: Set this to your monitor’s refresh rate if you want to maximize your frame rates, or to something more modest if you want to give your graphics card a break and keep temperatures and noise levels down.
VSync: If you have Freesync or GSync support in your display, turn VSync off. The proprietary technologies are better at warding off screen tearing and stuttering and don’t introduce any input lag. If your monitor doesn’t support those technologies, then VSync is a viable alternative, but only enable it if you are experiencing screen tearing.
Motion blur: Very few people like this setting, so it’s probably best to turn it off. If you like it, though, it doesn’t introduce much additional demand on your graphics card, so you can leave it enabled.
Anti-aliasing: There are a few options here, so play around with them if you have a preference, but I found TSR to be by far the most effective. It looks good, didn’t have much in the way of visual artifacts, and its performance was way ahead of every other option. You can turn AA off entirely if you need to maximize performance, but the jaggies are quite ugly, and the performance jump over TSR isn’t dramatic.
View distance: I hate pop-in, so this is one setting I usually set to maximum. However, I didn’t find it made a huge difference to in-game visuals. Performance does improve away from the top settings, though, so I’d set this to Medium or High, depending on your preferences.
Grass details: Just don’t set this to Low, or it removes all grass entirely, leaving you with just flat ground textures that look straight out of the late ’90s. Medium works absolutely fine.
Shadows: Shadows have a big impact on in-game performance. Set this to Medium for a good blend of visuals and performance.
Texture quality: Medium. Higher looks nicer up close, but you won’t notice much difference when you’re running around.
DLSS: If you have an Nvidia graphics card, enabling DLSS in Quality or Balanced modes will give you a big bump in frame rate. There are some visual losses at Performance settings, so I’d stay clear of that unless you really need to use it.
Palworld has a relatively simple art style, aping its Pokémon inspirations. But that also means its system requirements aren’t particularly taxing.
The minimum system requirements are low enough that any computer from the past five years with any kind of graphics card will have no trouble getting this game up and running. We can’t guarantee the performance will be stellar, and the experience will definitely not be consistent throughout the game, but if all you want to do is solo play Palworld to see what the fuss is all about, just about anyone can get it going.
The only real standout requirement is the need for an SSD. This is absolutely required, according to the developers, so if you’re still gaming on a hard drive (why are you still gaming on a hard drive?), then you might be out of luck. Fortunately, SSDs today are incredibly affordable.
The recommended system requirements are more stringent — an RTX 2070 is still a capable GPU, even if it is several generations old. The 32GB of RAM is arguably the bigger hurdle, however, as while many of the most popular Steam graphics cards can offer comparable performance to that 2070, around 70% of Steam gamers have less than 32GB of RAM, with around 50% sitting at just 16GB.
That’s not an expensive upgrade either, but it’s still one that many gamers will have to do if they want to be able to meet Palworld’s recommended requirements.
Palworld’s performance is far from consistent, with stutters and lag when you first load into the world, and random frame time spikes when you spin the camera around, but it’s still worth knowing what kind of performance difference you can expect between our preferred settings and a maxed out Palworld experience.
We used the following test system to check frame rates and settings in Palworld:
I was running the latest driver at the time of testing, Adrenalin 24.1.1, with Smart Access Memory enabled and the GPU’s tuning profile set to Quiet.
We tested Palworld at our chosen settings at 1080p and 1440p, and at 1440p with all settings maxed out. I recorded frame rate and frame time averages (here’s why frame times are important).
It’s clear that adjusting the in-game settings can dramatically affect Palworld performance, even with a high-end gaming PC like this one. Resolution doesn’t seem to play a big role, at least compared to other settings, though, so make sure you’re playing at native.
Now you’ve maxed out your Palworld performance, how about improving your gameplay skills? Here’s our Palworld beginner’s guide to get you started.
ASUS has started selling its UGen Intel Arc Pro B70 graphics card in Europe, bringing its take on Intel’s workstation GPU to customers with a hefty €1,799 recommended price. The card is available in Germany and Austria, while ASUS lists it at CHF 1,799 in Switzerland.
Intel first introduced the Arc Pro B70 in March 2026, with its own branded model starting at $949. ASUS’s version arrives several months later with the same core GPU architecture but a different cooling design and a higher power rating. The price also places it well above Intel’s original starting point, although the two prices are not directly comparable because ASUS’s European figure includes VAT.
Anthropic has officially filed to go public, and buried inside its S-1 is a blunt warning about the technology at the center of its business. The maker of Claude AI says advanced AI could cause everything from large-scale cyberattacks and geopolitical instability to catastrophic or even existential risks for humanity.
The warnings take up a surprisingly large part of the filing. Axios notes that more than 90 pages, or roughly a third of the prospectus, focus on risk factors. Many of them warn about what could happen as AI systems become more capable and autonomous.
AI giants have a growing autonomy problem on their hands. A new Axios report has revealed that Anthropic's Claude recently accessed publicly available Georgia vote count without human authorization, sparking fresh concerns about AI security ahead of the upcoming midterm elections.