Window sensors are a critical part of any home security system. When cameras fail, a window sensor becomes your last line of defense. Install them on all your windows, and you will know when an intruder attempts to access your house using one of your windows.
Some window sensors use loud chimes or siren-like alarms, while others send a notification to your phone. Regardless of how they alert you, most window sensors work the same way. Knowing how these window sensors work will help you install them properly, so they don’t fail you when you need them the most.
A window sensor package is composed of two small units with adhesive backing or screws for mounting. One unit attaches to the window, and another unit affixes to the stationary window frame. The two sensor units typically are positioned close together in a location on the window where they cannot be seen or tampered with from the outside. Once the sensors are activated, an alarm will sound, and alerts will be sent out when the window is opened. It’s not an always-on form of security. Most window sensors have a switch that lets you turn them off, so you can open your windows without triggering the alarm.
Window sensor alarms may seem sophisticated, but they are surprisingly simple. At their core, window sensors rely on magnetism and a basic electronic switch. Remember how we said there were two units in a window sensor package? They each serve a different purpose. The window-based unit contains a small magnet that interacts with the reed switch and security system inside the window frame unit. The magnet is a trigger that controls the switch inside the window frame unit. It is this reed switch that turns on and also turns off the security system. This security system can be as simple as a loud audible alarm or as complex as a wireless module that alerts your smartphone.
You may have never heard of a reed switch, but you likely use one every day. If you have a laptop that turns on when you open it and turns off when you close it, there likely is a reed switch and magnet somewhere in the casing. Kindles, iPads, and other tablets also use a reed switch that interacts with a magnetic cover to turn the display on and off. Reed switches are found in everything from dishwashers to weather anemometers. They were first invented in the 1930s by Walter B. Elwood of Bell Laboratories.
The reed switch is a relatively simple but very effective switch. It is composed of two or more flat ferrous reeds that are magnetized. These reeds are enclosed inside a glass capsule filled with an inert gas that helps to keep them free from external contaminants and corrosion. These reeds move closer to each other and eventually make contact in the presence of a magnet. They then break apart when the magnetic field is moved away. These reeds move slowly and smoothly, making contact along their flat surface. It’s this slow and secure contact that makes the reed switch so reliable and long-lasting.
The reed switch is the core component in a window alarm. When the window is closed, the magnet causes the reeds to move together until they touch. When the reeds are in contact with each other, they complete the electric circuit inside the window sensor, allowing electricity to flow in a continuous loop. When the windows open, the magnet moves away, and the reeds break apart. This opens the circuit, which halts the electrical current and triggers the security system inside the window sensor. The security system then sounds an alarm or sends out alerts.
Few things ruin a quiet evening faster than a robot vacuum roaring through the living room. Most of us end up pausing the cleaning run, which defeats the whole purpose of owning one. Matic thinks it has the answer with its new Serene robot vacuum, and the big selling point is how little noise it makes.
The Matic Serene runs at 52 decibels even when cleaning at full power. To put that in perspective, Matic compares it to the hum of your refrigerator. It is available now for $1,695, which is $200 more than the original Matic’s current price.
Outdoor security cameras are not always practical if you live in an apartment or rental. Drilling into an exterior wall may be off-limits, while pointing a regular indoor camera through a window can create another problem once reflections start showing up after dark.
Baseus is trying to solve both issues with the new PrimeSentinel W1, a $69.99 security camera designed specifically to monitor the outdoors through glass. It mounts directly to a window without drilling and uses a 4K Starlight sensor with an F1.0 aperture for full-color monitoring during the day and at night.
This post is brought to you in paid partnership with Best Buy.
Technology evolves every day, transforming how we live and work. Our devices are becoming more than tools we use. They are increasingly capable companions that help streamline day-to-day routines and spark creative ideas. If you have been waiting for the right moment to upgrade your tech setup, the Discover Samsung Shopping Event offers an opportunity to explore what connected, AI-powered living can look like.