Why you should buy it: It can make incredibly high-detail objects.
Who it’s for: Anyone looking to print small size, high-detail objects
Why we picked the Anycubic Photon:
Up until very recently, consumer-level stereolithography printers were essentially the unicorns of the 3D printing world. For years, there were only a few of them for sale to consumers, and they were typically far too expensive for most 3D printing enthusiasts to afford. The Anycubic Photon changes that.
This printer is capable of producing insanely high-detail objects. This is largely thanks to its SLA/DLP printing process, which allows the machine to print with extremely thin layers. We’re talking less than a tenth of the width of a human hair. Make no mistake — the Photon’s prints are even more detailed than those from the most high-end FDM printer we’ve ever tested.
Be warned, though. This detail does come at a price. Unfortunately the Photon also has a woefully tiny build envelope, so you can’t print anything over 4.5 x 2.5 x 6.1 inches (115 x 65 x 155 millimeters) on it. It’s also a huge pain in the ass to work with the printer’s sticky, stinky, and mildly toxic resin. You have to wear gloves to avoid touching it, and soak finished parts in isopropyl alcohol to remove any uncured goo. It’s not nearly as convenient or low-maintenance as the average FDM printer.
So while the Photon is a budget-friendly beast in terms of print performance, it’s also not for everyone.
Why you should buy it: It’s simple to use, but provides plenty of room for learning and progression
Who it’s for: beginners and intermediate users who want a super reliable, super versatile printer
Why we picked the Lulzbot Mini:
There are a lot of printers on the market that cater to beginners, but very few of them do it correctly. One thing that’s become increasingly common among “beginner friendly” printers is to strip away the user’s available choices in favor of a watered-down, over-simplified UI. Oftentimes, you’ll only be able to choose from three different resolution options (high, medium, or low), and have zero access or control over “confusing” settings like extrusion speed, infill density, or hotend temperature. This lack of access makes the machine more straightforward to operate, but it also limits what you can do with your 3D printer in a big way. It’s basically the lazy way to make a printer “user friendly.”
Lulzbot does not take this lazy approach. Instead of stripping away advanced options, Lulzbot’s software lets you choose your level of complexity and control. There is a Basic interface for when you only need to adjust simple settings (temp, speed, layer height, etc), but also an Advanced tab that gives you more granular control over the printing parameters. This is great for beginners because it’s simple and straightforward when you’re still learning things, yet it also doesn’t prevent you from going deeper, increasing your knowledge, and getting more out of your 3D printer.
In addition to its excellent UI, Lulzbot Mini is also one of the most reliable and consistent FDM printers that’s ever passed through DT’s testing room. Sure, it doesn’t have an enormous build envelope or create ridiculously high resolution prints, but virtually everything else about this printer is fantastic. It has a heated bed, a Hexagon hot end that allows you to print with tons of different materials, and self-leveling software that makes it a breeze to maintain. It’s also highly upgradable, so if you ever feel like tricking out your setup, you totally can. We really, really like this printer!
Why you should buy it: Despite being dirt cheap, it has an auto-leveling heated bed, LCD screen, and variable temp hot end.
Who it’s for: Budget buyers who don’t mind a small build envelope
Why we picked it Monoprice Mini Delta:
As far as we can tell, Monoprice’s Mini Delta is one of the cheapest 3D printers you can buy that’s not a kit — but that’s not the only reason we picked it. In addition to being fully assembled and ready to print straight out of the box, this machine also comes with a heated bed — something that we believe is a crucial feature for FDM printers.
In addition to the heated bed, the Mini Delta also has a variable temperature hot end, which allows you to adjust settings and print with a wide range of different materials — including basic filaments like ABS and PLA, to more advanced materials like conductive PLA, wood and metal composites, or dissolvable PVA. On top of that, the heated bed is also self-leveling, which means you’ll never have to calibrate the machine manually before initiating a print.
Monoprice certainly gives you a lot of bang for your buck here, but the Mini Delta definitely isn’t perfect. Novices should expect a fairly steep learning curve with this machine, and be prepared for some high-level troubleshooting that will likely be required when something inevitably goes wrong. Just because it’s cheap does not mean that it is a good for choice for beginners.
Why you should buy it: It has all the important features you need in a filament-based 3D printer.
Who it’s for: Anyone looking to get the most bang for their buck.
Why we picked Monoprice Maker Select Plus:
Up until Monoprice vaulted into the 3D printing arena, it was really, really hard to find a budget friendly printer that had a large build area, a heated bed, a stable frame, and an extruder that could handle lots of different materials. Near impossible, honestly. But now, there are plenty of options in this price range — and the MP Maker Select Plus is arguably the best of the bunch — unless you’re willing to get a kit and build the printer yourself.
The MSP boasts a spacious build envelope that’s 7.9 x 7.9 x 7.1 inches, which is nothing to scoff at. This means that not only can you print bigger parts — you can also fit more small parts on the build plate, which cuts down on production times.
This build plate is also heated, which helps prevents the extruded filament from cooling, contracting, and warping the shape of your printed object. This feature is crucial (especially if you’re printing with ABS), drastically reduces your chances of getting a misprint, and eliminates the need to print with a raft, which uses up additional filament.
Recently, we've entered an exciting collaboration with Maple Media, creating a bundle of 17 apps worth having on your phone. From relaxed fun to serious productivity boosts, these apps cover all your bases and provide a fun boost to your phone. Normally, the bundle is $9.99 per month (far lower than the cost of using the apps individually), but for your first 7 days you can get access to the bundle for free. View the full Digital Trends App Bundle for a complete list of the apps, or read on for a summarized take.
What's happened? This week, China's Quality Certification Center released information about a battery (EB-BS04898ABY) with a maximum capacity of 4,855mAh. That's the same capacity as was previously seen in the Samsung Galaxy S25 Ultra, and fans have taken this certification to mean the Galaxy S26 Ultra will not see a capacity increase after all.
The Samsung Galaxy Ultra models have had the same battery capacity for the last five years.
What's happened? Samsung has officially announced the Galaxy Tab S10 Lite, a budget-friendly alternative to the Galaxy Tab S10. The device has been rumored for months, but this is the first time Samsung has officially acknowledged its existence.
The Galaxy Tab S10 Lite will have a 10.9-inch display and a peak brightness of 600 nits — a bit on the lower side, versus the iPad Pro's maximum brightness of 1,600 nits.